My first non Games Workshop model
My first contest entry
My first skin
Rather proud of the first....looking forward to more improvement..of course
Kingdom Death's White Speaker
The Prodigal Gamer
miniatures, modeling, gaming, etc
Monday, October 31, 2011
Friday, October 21, 2011
Contested Ground!
With October's turn in completed, I've been focusing on several models non - GW.
Most have been selected to challenge myself in the painting of skin or cloth.
Others and the focus of this blog entry are being worked on for specific contests.
First, for PAINT IT PINK
I chose Grissel Bloodsong from Privateer Press. She is coming along well, but
still LOTS to do
and for WAMP the Kingdom Death contest
I chose one of the white speaker models on a base from miliput and a green stuff
dragon head. Here she is ready for paint
Challenging myself to improve!
Now Get Your Paint On!
Most have been selected to challenge myself in the painting of skin or cloth.
Others and the focus of this blog entry are being worked on for specific contests.
First, for PAINT IT PINK
I chose Grissel Bloodsong from Privateer Press. She is coming along well, but
still LOTS to do
and for WAMP the Kingdom Death contest
I chose one of the white speaker models on a base from miliput and a green stuff
dragon head. Here she is ready for paint
Challenging myself to improve!
Now Get Your Paint On!
Monday, October 17, 2011
Oktoberfest Marine Style!
I'm 14 days early! I have October's installment of the WARPIGG painting
challenge completed!!!!!
If on November 3rd I cannot attend the live turn in this post will serve to
do just that.
2 Units of Tactical Marines - 420 pts
powerfist sergeants, lascannon heavy weapons, melta special weapons
1 piece of terrain
Why yes a marine's head does fit neatly inside the beasties mouth!
Now get your paint on!
challenge completed!!!!!
If on November 3rd I cannot attend the live turn in this post will serve to
do just that.
2 Units of Tactical Marines - 420 pts
powerfist sergeants, lascannon heavy weapons, melta special weapons
1 piece of terrain
Why yes a marine's head does fit neatly inside the beasties mouth!
Now get your paint on!
Casting Call
This is part 2 of my foray into casting bits.
It was time to break the first half of the mold out of the lego box.
After peeling of the plasticine - which I need to find a way to keep it from sticking
so badly to what I'm casting or find another medium - I made sure the pieces were
again laying in their proper spots and rebuilt the lego box...a little higher this time.
Mix the Oomoo and pour
Wait 6 hours
You probably notice the color difference. Me too! The only thing I can figure is
that I didn't get the blue part of the red / blue premixed properly, but thankfully
it did not affect the mold OR the results.
At this point, I failed to grab any pictures. The task though was to use an exacto
knife and clean up the air vents etc for my newly created injection mold.
I then mixed the 2 part resin which only has a 3 min max work time so it had to be
done very quickly. The tutorial I had watched said be careful you don't use too much
resin. I guessed how much I would need...cut that in half...and then when I injected it,
It took less than half of my half! Less than 5 ccs ( 1 tsp ) completely fill the mold to
overflowing.
The results?! ( Pre opening the mold I'm praying for just 2 usable power fists )
I got 3!!!! The only flaw in the whole deal was my setup! If I had placed them
differently, I would have 4 and have not had any bubbles. As it was I had very small
bubbles just in the finger tips which I daubed with the new GW liquid green stuff.
Attached -
Completely painted -
An astounding success! I'm looking forward to my next role!
Now get your paint on!
It was time to break the first half of the mold out of the lego box.
After peeling of the plasticine - which I need to find a way to keep it from sticking
so badly to what I'm casting or find another medium - I made sure the pieces were
again laying in their proper spots and rebuilt the lego box...a little higher this time.
Mix the Oomoo and pour
Wait 6 hours
You probably notice the color difference. Me too! The only thing I can figure is
that I didn't get the blue part of the red / blue premixed properly, but thankfully
it did not affect the mold OR the results.
At this point, I failed to grab any pictures. The task though was to use an exacto
knife and clean up the air vents etc for my newly created injection mold.
I then mixed the 2 part resin which only has a 3 min max work time so it had to be
done very quickly. The tutorial I had watched said be careful you don't use too much
resin. I guessed how much I would need...cut that in half...and then when I injected it,
It took less than half of my half! Less than 5 ccs ( 1 tsp ) completely fill the mold to
overflowing.
The results?! ( Pre opening the mold I'm praying for just 2 usable power fists )
I got 3!!!! The only flaw in the whole deal was my setup! If I had placed them
differently, I would have 4 and have not had any bubbles. As it was I had very small
bubbles just in the finger tips which I daubed with the new GW liquid green stuff.
Attached -
Completely painted -
An astounding success! I'm looking forward to my next role!
Now get your paint on!
Saturday, October 8, 2011
A Beacon In The Dark
I sent a picture of my workspace over to the guys at Massive Voodoo
for their birthday contest. Imagine my surprise to see that jarhead
actually posted it on his blog. I was honored and thrilled. You can see
that here on his site.
Tonight, I snapped a shot of my truck with all my lights going while
I was working on various projects. Amusing!
Now get your paint on!
for their birthday contest. Imagine my surprise to see that jarhead
actually posted it on his blog. I was honored and thrilled. You can see
that here on his site.
Tonight, I snapped a shot of my truck with all my lights going while
I was working on various projects. Amusing!
Now get your paint on!
Color Theory - Royally Tough Subject!
I made a little progress on Queen Ileosa. Still have not touched
a brush to her, but I have now chosen a split complimentary
palette which can be seen here
http://colorschemedesigner.com/#4e31Tw0w0w0w0
Next it was time to ready the paints by continuing my change over
to dropper bottles
Left to right
Water - Flowaid - Retarder Mix
Burnished Gold - for fine scroll work, crown, etc
White - for creating tint
Gray - for creating tone
Black - for creating shade
Orange - split complimentary color
Yellow - split complimentary color
Blue/Violet - split complimentary color
Can't wait to get started still hoping to do this great model justice like you can see
Here
Now get your paint on!
a brush to her, but I have now chosen a split complimentary
palette which can be seen here
http://colorschemedesigner.com/#4e31Tw0w0w0w0
Next it was time to ready the paints by continuing my change over
to dropper bottles
Left to right
Water - Flowaid - Retarder Mix
Burnished Gold - for fine scroll work, crown, etc
White - for creating tint
Gray - for creating tone
Black - for creating shade
Orange - split complimentary color
Yellow - split complimentary color
Blue/Violet - split complimentary color
Can't wait to get started still hoping to do this great model justice like you can see
Here
Now get your paint on!
RE-Kroot testing!
Well I failed to post the previous test model for the Sha'cea kroot. Needless
to say you didn't miss anything. I hated it and it is taking an "awesome" bath.
Tonight I finished another version and I am extremely happy with how it
turned out.
Kroot test paint job #2
Once the owner approves of the paint scheme, work can continue.
Now get your paint on!
to say you didn't miss anything. I hated it and it is taking an "awesome" bath.
Tonight I finished another version and I am extremely happy with how it
turned out.
Kroot test paint job #2
Once the owner approves of the paint scheme, work can continue.
Now get your paint on!
Subscribe to:
Posts (Atom)